Earth and Twigs Finished

Well I spent last week quilting, by hand, my Sue Spargo BOM.  Over the weekend I attached the binding.

Now waiting for this years

I used Valdani perle for the quilting and just outlined the applique.  Now just to add a pole sleeve and it will be ready for hanging.

It's in the Bag

 I have adapted the handle from being two front and back to one side to side.  This allows me better stuffing ability!

 Just for fun I decided to do drizzle stitches on the closure button.

There is something about this leaf that just worked for me in it's simple form.

Totally Finished

This has been sat in my studio just waiting for it's binding. Well it finally got one.

Attaching needlepoint to a bag

 Before I start I should add that this would also work for a prefinished pillow or even the likes of a demin jacket.

The hardest part for me is the cutting of the canvas, my little one Amanda was saying "mom you shouldn't cut it!".  My nerves must have been showing.

 For a project with shaping like this heart you will also need to clip any curves and inside corners.

 Finger pressing next.  This piece has a sharp point which is pressed first across the horizontal and then the sides and pressed in too.  This may lead to the necessity of trimming more from the excess canvas as was the case here.

Pins hold everything is place.

 This is the bag Amanda and I choose for the heart.  The finished bag will be a birthday present for Fiona with a new swimming towel inside.  I loved the canvas handles and gromits.  It is surprislingly well made with a lining, zip and even welting at the base.  Found it at Meijers (a local grocery store).  I had also considered a straw bag but the gromits sold it for me.

 Here you can see everything pressed and pinned.

 In this case I wanted a casual placement so no headaches about it being centred.

Using the pins that are already in place I then pinned it to the bag.

 I attached this using quilting thread but for a novice I would suggest using invisible thread, particularly if you are not going to add a cording.

The knot is buried under the needlepoint and the piece is then attached using small slip stitches.

I only take a thread or two so as to reduce the amount of stitching that shows on the inside of the bag.

 If you intend to add cording as I did leave a gap for the ends of the cording to be tucked into.  I did this at the inside corner at the top.

 At this stage I did briefly consider not adding a cording, however I always think they look more finished with a bit of trim.

 I made this cording using DMC floss that I'd used to attach the spirals.  There is also a small amount of silver thread for bling.

 The same thread is used to attach the cording with the stitches burrowed into the needlepoint.

 Finished, as there was some cording left I added it to the zipper pull.

Beginning to end for this finishing project was about 90 minutes with a cost of $15 for the bag.  Not bad if I do say so myself.

Oh and then Amanda and I went got the beach towel to round off this gift.

Finishing Pretty Petals

 Well folks here we go.

This one was interesting as I did not want to add any stiff inner layer.

First I traced the original pattern twice onto freezer paper (on the mat side).

 Now iron this shiny side down onto Ultra Suede and cotton quilters batting.

I used Ultra Suede to make life a bit easier as there is no need to turn the edges under.

Cut out the Ultra Suede on the line.

I cut the batting out a little bit inside the line.

MAKE SURE YOU REMEMBER TO KEEP EACH PIECE LABELED WITH THE APPROPRIATE LETTER.

 I know this bit is nerve racking but you can do this.

AGAIN label each petal layer, then cut around leaving about a 1/4 inch of canvas.

Now clip into each base at the corners.

 I then finger pressed the excess canvas to the rear, if you wish a firmer edge and be hassled with dragging out the iron then go ahead and GENTLY press with an iron.  Just be careful that you don't compress the threads.

 Here you see the layers.

Note that I have only finger pressed one petal at the moment.  That is just personal preference.

 Not begins the stitching.  I catch the edge of the pressed under canvas and the Ultra Suede.

 Continue working around in tiny little stitches.  Some finishers will do this at the same time of attaching the cording but I prefer to do each part separately.

Takes longer but easier to manage.

 Here you can see how I finger press as I'm going along.

 Just another view, here you can see just how tiny the stitches are.  Just taking a nibble of the Ultra Suede.

When you get close to the end leave a gap at the center for insertion of wire and cording ends.

I choose to use a french knot instead of the suggested stitch.

Again cut this out and finger press the excess canvas to the wrong side.

Put to one side for now.

 I did tack down the excess canvas and left a long tail of quilting thread for later.

 All four parts ready for cording and assembly.

I used DMC memory thread that is a wire wrapped in thread but you could use floral wire.  As chose the DMC because it will show on the rear and this allowed me some degree of colour matching.

The cording is made to match using the same two blues I stitched with.  Again you could use a purchased cord if you wished.

The wire is attached first.  I tried to keep it towards the back of each piece so the cording can nestle on top.

The cording comes next and is attached by sewing though the actual cording (into the valley) and coming out into your needlepoint being careful not to split the threads.

Then back towards the cording again into a valley.

When you have done each layer stack them in the most pleasing manner.

Using a darning needle and quilting thread stitch them together though the center.  I was careful to come out at the edge on the bottom layer for a neater look.

While you are doing this part you may add a magnet between the bottom two layers.  This is what is suggested in the original instructions.

 This allows for either a really cool fridge magnet or with the use of a second magnet a pin.

 Now back to the center piece.

I used the leftover quilting thread and gathered the piece to match the previously finished section.  I also added a piece of batting into the center.

 Again using the quilting thread attach to the petals.

Your master piece is now done.

Mine is currently being used as a pin and the center makes a very useful pin cushion.

It will be interesting to see how people react to this unusual pin.

Today is the perfect day for such a spring like piece.

Pretty Petal Pin

Stitching all done.  Almost ran out of the Crystal Braid I used for the center and one set of petals.

For anyone out there who is doing this piece please don't trace petal sets as close together as I did!  As I finish my own work it is not a major problem.

I need to find some ultra suede to back the petals with and then I will photograph the method I intend to use. 

First the piece needs to be left for at least 48 hours on the stretcher bars.  This helps avoid the need for blocking.

Pomegranete Runner Finished

Binding done and now this is ready to take pride of place on my dining table.  Loved working on this both in the class last fall and then here and there whilst my girls do their various activities. 

It has produced many ohs and ars leaving me in danger of getting a very large head.  The other effect is that I have two new wool stitchers and a possible other who has never even seen my work.  I have decided to have a small group meeting at my house once a month.  My wish is to have both new and experienced stitchers so that more people learn the pleasure and relaxation that this type of project allows.